SAHG2S 2.75x15 Inch Side Armor Pair | Ultra Lightweight .44 Mag & 9mm Protection | Made in USA

Atomic Defense SAHG2S Side Armor: The Definitive Ultra-Lightweight Panels for .44 Magnum Flank Protection and Full Mobility

• The Atomic Defense SAHG2S is a field-proven side armor insert designed to protect your vulnerable flank areas during high-threat engagements. Built to meet and exceed strict NIJ 0101.06 and NIJ 0101.07 standards, this Atomic Defense SAHG2S side body armor provides vital coverage without restricting your tactical movement. These Atomic Defense SAHG2S side armor plates are engineered from advanced polyethylene for immediate deployment in civilian, law enforcement, or military carriers.
• Survive Direct Hits from .44 Magnum and 9mm Rounds: Tested to rigorous HG2 standards, these side panels stop high-velocity pistol fire dead in its tracks, offering reliable 9mm side armor protection. You can push into close-quarters environments knowing your vulnerable flanks are fully shielded.
• Bend and Twist Naturally Thanks to 45-Degree Cut Corners: Traditional square plates dig into your ribs and hips, slowing you down. The 2.75 by 15-inch profile features specialized angled cuts that allow you to drive, crouch, and move through tight spaces without the Atomic Defense SAHG2S side plates armor pinching or binding.
• Move Faster and Longer on Foot with Ultra-Light Armor: Made from advanced Polyethylene (PEAD), these ultra-lightweight side armor inserts strip away the dragging weight of standard armor. Your carrier stays light and balanced, preventing exhaustion on extended patrols without sacrificing ballistic security.

Atomic Defense SAHG2S Level IIIA Side Armor Panels Features & Specifications

The Atomic Defense SAHG2S soft side armor delivers vital flank protection without slowing you down. Built from ultra-lightweight Polyethylene (PEAD), these handgun rated side armor panels stop heavy rounds like the .44 Magnum and 9mm while keeping your carrier perfectly balanced. Unlike traditional bulky plates, the SAHG2S 2.75x15" Side Armor features a specialized 2.75 by 15-inch profile with 45-degree angled cuts, allowing you to drive, crouch, and maneuver in tight spaces without the armor pinching your ribs. It is the definitive solution for professionals who demand field-proven ballistic security and maximum mobility on long patrols.

Key Features

• Survive Direct Hits from .44 Magnum and 9mm Rounds: Tested to rigorous HG2 standards, this .44 Mag rated side body armor stops high-velocity pistol fire dead in its tracks. You can push into close-quarters environments knowing your vulnerable flanks are fully shielded.
• Bend and Twist Naturally Thanks to 45-Degree Cut Corners: Traditional square plates dig into your ribs and hips, slowing you down. The specialized angled cuts on these PEAD side armor plates allow you to drive, crouch, and move through tight spaces without the armor pinching or binding.
• Move Faster and Longer on Foot with Ultra-Light Armor: Made from advanced Polyethylene (PEAD), these Polyethylene Level IIIA side panels strip away the dragging weight of standard armor. Your carrier stays light and balanced, preventing exhaustion on extended patrols without sacrificing ballistic security.
• Upgrade Your Current Loadout Instantly: The slim 2.75x15" profile is sized to slide securely into standard law enforcement, military, and civilian carriers as reliable cummerbund side armor inserts.

Specifications

• Model: SAHG2S
• Ballistic Rating: HG2 (Meets and exceeds NIJ 0101.06 and NIJ 0101.07 standards)
• Core Material: High-performance Polyethylene (PEAD)
• Dimensions: 2.75 inches x 15 inches
• Design Profile: 45-degree angled corner cuts
• Defeated Threats (Caliber & Velocity): * 9mm Luger FMJ RN 124 grain (Up to 1470 ft/s)
  • .357 Mag JSP 158 grain (1430 ft/s)
  • .44 Mag JHP 240 grain (1430 ft/s)
• Manufacturing Standard: Berry Compliant

What's in the box of the Atomic Defense SAHG2S 2.75x15" Side Armor?

• (2) 2.75x15 side armor inserts (Pre-sealed in weather-resistant covers)
• (1) Atomic Defense Ballistic Care and Maintenance Guide

SAHG2S side armor plates FAQs

Will SAHG2S side plates fit my cummerbund? 

Yes. These inserts are 2.75 inches tall and 15 inches long. They slide easily into most standard tactical carriers and cummerbunds that accept SAHG2S soft side armor.

Why use PEAD instead of Kevlar side armor? 

PEAD stands for Polyethylene. It is a highly advanced, tough plastic. Compared to older Kevlar, PEAD is much lighter and handles water better. This keeps you fast, dry, and secure on long missions.

Are these a good lightweight alternative to steel side plates? 

Absolutely. Steel plates are very heavy and can cause bullet pieces to splash into your arms or chin. Our HG2 rated side body armor is ultra-lightweight. It catches and stops the bullet safely without the heavy drag of steel.

Is this a smart law enforcement side armor upgrade? 

Yes. Police officers often face high-velocity handgun threats like 9mm and .44 Magnum. These SAHG2S Level IIIA Side Armor Panels are tested to stop those exact rounds. The special 45-degree angled corners also make it easy to sit in a patrol car and drive without the armor poking your ribs.

What does the HG2 rating on the SAHG2S mean? 

HG2 is the newest safety standard (NIJ 0101.07). It replaces the older Level IIIA rating. This means these side panels passed stricter tests to stop fast handgun bullets. They will safely stop 9mm rounds flying at 1,470 feet per second and heavy .44 Magnum bullets.

Will these side armor panels stop rifle rounds? 

No. The SAHG2S panels are soft body armor. They are made specifically to stop handguns and shotguns. To stop fast rifle bullets like 5.56 or 7.62, you need thick, hard armor plates. These soft panels are built to keep you safe from pistols while staying light and fast.

Can the SAHG2S side panels take multiple hits? 

Yes. Our advanced PEAD (Polyethylene) plastic is incredibly strong. The fibers act like a tightly woven net. When a bullet hits, this net spreads out the power instantly. This allows the panel to stop several handgun bullets without failing or letting the impact crush your ribs.

How long does PEAD soft armor last compared to Kevlar? 

Older Kevlar can break down and lose its stopping power when it gets wet from sweat or rain. PEAD handles water much better and is very tough. With basic care, your SAHG2S side body armor will keep its full strength for its entire 5-year shelf life. This makes them a smarter long-term choice.

How do I clean and maintain my side armor panels? 

Cleaning is very easy. Just wipe the outside of the panels with a damp cloth and mild soap to remove dirt or sweat. Never put the armor in a washing machine, dry cleaner, or use an iron on it. Keep them stored flat at normal room temperature when you are not wearing your carrier.

Can I travel or fly with my SAHG2S side armor? 

Yes, you usually can. The TSA allows body armor in both checked and carry-on bags inside the United States. Since these are light and do not have metal, they are easy to pack. Always check local laws if you are traveling to another country or to a state with strict armor rules like New York.

Where can I find the Atomic Defense SAHG2S for sale?

 If you are looking for the SAHG2S Side Armor for sale, you can purchase it directly from Atomic Defense. Buying directly from us ensures you receive field-proven, Berry Compliant gear and expert customer support to help you build your tactical loadout.